Beckett Oil Burner Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Kamine Beckett Oil Burner herunter. Beckett Oil Burner Instruction manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 6
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTRUCTION MANUAL
SR
OIL BURNER
JECIFICATIONS
CAPACITIES MODEL SR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 0.40 to 2.00 gallons per hour
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56,000 to 284,000 BTU/HR Input
FUELS
NO.1 or NO.2 Heating Oil (ASTM D396) Only
In Canada, NO.1 or NO.2 Furnace Oil
DIMENSIONS (Standard)
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5/8"
Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1/2"
Depth (Chassis Only) . . . . . . . . . . . . . . . . . . . 8-1/2"
ELECTRICAL CHARACTERISTICS (See Note)
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 115 V/60 Hz 1 PH
Operating Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. (Max.) 5.8 Amps
Motor 1/8 HP 1725 RPM, N.E.M.A. "N" Flange, manual
reset overload, protection
Ignition 10,000 V/23 ma secondary, continuous
duty, shielded transformer or solid-state ignition system
FUEL UNIT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. Sundstrand, or Webster
NOTE:
50 Hertz electrical components are available on special order.
-
.
"'-./
.Form 6104 BSR- R987
Printed in U.S.A.
Dear Homeowner:
Over forty years of engineering and product development have
gone into your new oil burner. Its quality and design are unsur-
passed. Properly installed and maintained itwill provide many years
of efficient, trouble-free operation. Please read this Instruction
Manual carefully, and give special attention to the following points:
- An oil burner must have a generous supply of combustion air to
operate properly. Please refer to the information in this manual for
details.
- NEVER attempt to use gasoline in your heating appliance. Gaso-
line is more combustible than fuel oil and could result in a serious
explosion. NEVER burn garbage or refuse in your heating appli-
ance or try to light oil by tossing burning material into the heater.
- INSTALLATION AND ADJUSTMENT OF THE BURNER REQUIRES
TECHNICAL KNOWLEDGE AND THE USE OF COMBUSTION
TEST INSTRUMENTS. DO NOT TAMPER WITH THE UNIT OR
CONTROLS. CALL YOUR SERVICEMAN.
Beckett warrants its equipment specifically to those who have pur-
chased it for resale, including your dealer: In the event of any prob-
lems with your equipment or its installation, you should contact your
dealer for assistance.
TO THE INSTALLER
INSTALLATION OF THE BURNER MUST BE DONE BY A QUALlFIE[
INSTALLER IN ACCORDANCE WITH REGULATIONS OF THE
NATIONAL FIRE PROTECTION STANDARD FOR OIL-BURNING
EQUIPMENT, NFPA NO. 31, AND IN COMPLETE ACCORDANCE
WITH ALL LOCAL CODES AND AUTHORITIES HAVING JURISDIC-
TION. FOR RECOMMENDED INSTALLATION PRACTICE IN
CANADA, REFERENCE SHOULD BE MADE TO CSA STANDARD
B139.
A QUALIFIED INSTALLER IS AN INDIVIDUAL OR AGENCY WHO IS
RESPONSIBLE FOR THE INSTALLATION AND ADJUSTMENT OF
THE EQUIPMENT AND WHO IS PROPERLY LICENSED AND EXPE-
RIENCED TO INSTALL OIL-BURNING EQUIPMENT IN ACCORD-
ANCE WITH ALL CODES AND ORDINANCES.
A properly designed chimney of adequate size and height and ade-
quate combustion air supply are essentials for the best operation
of any heating plant.
When installing the heater and/or burner be sure to provide ade-
quate space for easy service and maintenance.
CONCEALED DAMAGE
If any damage to the burner or controls is found during unpacking
notify the carrier at once and file the appropriate claim.
Underwriter's Laboratories has certified this burner to comply with the
commercial standards CS75, and has listed it for use with #1 or#2 fuel
oil as specified inASTMD396. State and local approvals are shown on
burner rating label. The burner is certified in Canada by Canadian
Standards Association (CSA). All oil burners should be installed in
accordance with regulations of the National Fire Protection Associa-
tion pamphlet #31 and in complete accordance with alilocaJ codes
and authorities having jurisdiction. Regulation of these authorities
take precedence over the general instructions provided in this instal-
lation manual. For'recommended installation practice in Canada,
reference should be made to CSAStandard B 139
R.W. BECKETT CORPORATION
P.O. Box 1289, Elyria, Ohio 44036,
R.W. BECKETT CANADA, LTD
430 Laird, Unit 3, Guelph, Ontario, N1G 3X7
Seitenansicht 0
1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - .Form 6104 BSR- R987

INSTRUCTION MANUALSROIL BURNERJECIFICATIONSCAPACITIES MODEL SR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 0.40 to 2.00 gallons

Seite 2 - , ",'

fGENERAL IN FORMATIONFUEL UNITS & TUBING INSTALLATIONBurners are most commonly installed with a single stage fuelunit. This fuel unit, when connec

Seite 3 - - ELECTRODE POSITION

AIR TUBECOMBINATIONDETAIU"A" = Useable Air Tube Length"L" = "A"+5/S""R" = "A" + 2-7/S"&quo

Seite 4 - . . that there is

.3. Check mitial air adjustment. Normally the bulk air band (3)should be closed and the shutter (2) partially open.4. Close line swifcn to start burne

Seite 5 - OIL BURNER CERTIFICATE

OIL BURNER CERTIFICATEAS REQUIRED BY COMMERCIAL STANDARD CS75.56The, Oil Burner Model No. , Serial No. , installed at-(Make) "" bears a labe

Seite 6 - -UPGRADING OR CONVERSION

,---;',,--'",/ I 'rI 'II'\,,'-'", , ,. , ,, , ', " ": "" :, .- ," ,, '

Kommentare zu diesen Handbüchern

Keine Kommentare